CWBLM0017

CWBLM0017 RC2=28 when starting a PC5250 session. Check the following on the IBM iSeries family of servers:

1. On the operating system command line, type the following:

GO LICPGM 

Press the Enter key, and select Option 10 to display a list of installed license programs. If products 5722SS1 Option 12 (Host Server), 5722XE1 *BASE, 5722XW1 *BASE, and 5722XW1 Option 1 are not installed, install each missing license program option. All four license programs are required.

2. On the operating system command line, type the following:

WRKLICINF 

Press the Enter key, and select Option 5 to display each of the following products:

              License 

 Opt  Product   Term    Feature  Description 

      5722SS1  V5R3M0    5050    Operating System/400 

      5722SS1  V5        5051    Operating System/400 

      5722XW1  V5        5050    iSeries Access Base 

      5722XW1  V5R3M0    5101    iSeries Access Option 1 

Verify that the correct usage limit and threshold value are specified for each of these products. If necessary, select Option 2 to change any value. Type the command ADDLICKEY if it has not been previously run for any of these license program features.

3. On the operating system command line type the following:

Note: Before ending the host server or the subsystem, ensure this will not affect any active users. If it will affect active users, perform this step at a more convenient time.

ENDHOSTSVR SERVER(*CENTRAL) 

ENDPJ SBS(QUSRWRK) PGM(QSYS/QZSCSRVS) OPTION(*IMMED) 

STRHOSTSVR SERVER(*CENTRAL) 

Press the Enter key.

4. Stop and restart the PC or disconnect the PC5250 session. Then re-establish the PC5250 session.

5. If the problem is on a PC that is the system console work station, ensure the PC is at the most current version of 5722XE1 (for example, V5R3 for the V5R3 operating system) and that a current version of its service pack is installed.

If the problem is on a PC that is not a system console, installing the current level of 5722XE1 and its service pack might not be required; however, they are recommended.

////

P.S. ACCEDI ALLA PAGINA ATTRAVERSO OPERATIONAL CONSOLE.

Causa

Impossibile accedere alle informazioni sulla licenza del sistema. In base al numero rc2 ricevuto nel messaggio di errore, è possibile risalire al dettaglio degli errori come di seguito riportato:

rc2 = 28; Informazioni sulla licenza non trovate.
rc2 = 29; Informazioni sulla licenza non disponibili.


Correzione

Verificare che il prodotto IBM i Access per Windows sia installato e che al sistema sia stato applicato l'ultimo service pack di IBM i Access per Windows.

Verificare che le informazioni sulla licenza IBM i (WRKLICINF) per il prodotto IBM i Access per Windows, non stiano utilizzando le informazioni precedentemente memorizzate nella cache per il server centrale/licenza dai lavori avviati in precedenza (sottosistema/lavoro QUSRWRK/QZSCSRVS). Terminare tutti i lavori avviati in precedenza per aggiornare le informazioni sulla licenza.

Verificare che TIME sia sincronizzato per il sistema operativo, il PC e il KDC (Key Distribution Center).

///////////////////

Recommendation:

ENDTCPSVR *ALL
MONMSG MSGID(TCP0000)
ENDHOSTSVR SERVER(*ALL) ENDACTCNN(*DATABASE *FILE)
MONMSG MSGID(TCP0000)
DLYJOB DLY(300)
ENDTCP
MONMSG MSGID(TCP0000)
DLYJOB DLY(300)

Possible problems by not following recommendation are listed below:

o LDAP not restarting properly or losing data due to the server not being ended before subsystems.
o Netserver not restarting due to tasks not ending properly without an end of the server prior to the ending of subsystems.
o Document 378077607, Receiving CWBLM0017 RC2=28 Error When Trying to Start PC5250 Session: 
o Document 433532036, Telnet Fails after System Save (GO SAVE 21):  
o Document 659311574, Management Central Failing to Start and Receiving Message CWBCO1008 RC 8007: 

Network Server:

Recommendation:

VRYCFG CFGOBJ(NWSDNAME) CFGTYPE(*NWS) STATUS(*OFF)
DLYJOB DLY(300)

Note: The problem is that we are waiting approximately 3-15 minutes for the network server side to shut down. The timeframe is dependent on the network server function; in other words, it is a mail server or database server. The DLYJOB may be adjusted accordingly.

Possible problems by not following recommendation:

o Network Server will not start or the e-mail server is corrupted requiring a rebuild of the e-mail system.
o Often just the operating system will not start